imported>Hundfred (Created page with '== installation windows server 2008 on a ibm x345, modell 8670 == because there was an issue with the driver for the raid-controler, i had loads of tries until i found this way…') |
imported>Hundfred No edit summary |
||
Line 19: | Line 19: | ||
a special driver |
a special driver |
||
Line 47: | Line 46: | ||
.. |
|||
5) von der ibm-serverguide der version 7.4 den treiber (windows 2003 server) fuer den lsi 1030 controller laden |
|||
dieser findet sich auf der cd unter folgendem pfad, und muss ausgewählt werden. |
|||
cdrom |
|||
--- sguide |
|||
----- w2003drv |
|||
----- lsiscsi2 |
|||
6) press contine .... |
Revision as of 09:40, 20 August 2009
installation windows server 2008 on a ibm x345, modell 8670
because there was an issue with the driver for the raid-controler, i had loads of tries until i found this way, that worked for me:
1) boot the win2k8-server-install-dvd with an extern usb-dvd-drive
(this takes a long time because this machine supports only usb 1.0)
2) select "standard installation"
3) delete all partitions and prepare new ones, then klick on "continue"
4) some seconds after the installation has begun, press cancel/abort,
the install programm will start again.
now at the place where the partitions are shown, you have the opportunity to load
a special driver
5) on the cd IBM serverguide 7,4 you will find a driver designed for windows 2003 server,
for the lsi 1030 raid-controller
you will find it in that path:
cdrom
--- sguide
----- w2003drv
----- lsiscsi2
it is named: -- symmpi.sys
!!!there is also a never driver version out in the world, and also a driver designes for win2k8,
that did't work for me!!!! also that driver that you can find via lsi.com didn't work
6) after selecting that driver, click "continue";
..