Create a new article
Write your page title here:
We currently have 3,185 articles on s23. Type your article name above or create one of the articles listed here!



    < Debian
    Revision as of 14:09, 11 June 2005 by imported>mutante
    (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

    How To Setup A Debian Linux WebCam Server

    In modconf install:

    videodev (This is also known as the "video4linux" or "v4l" module)

    usbcore Install on all systems

    usb-uhci This is needed to enable USB circuitry on the motherboard so it's (Intel) system-specific. If you get errors trying to install it, try the usb-ohci or uhci drivers. ibmcam USB IBM (Xirlink) C-It Camera support. If you have another cam try the ov511 module (OV511 is a chipset that some cams, like the Creative WebCam III, are built on) or the dc2xx for those Kodak models.

    You could also try both the cpia and cpia_usb drivers (both at the same time). These are under the misc category instead of the usb category and some cameras (Creative WebCam II for example) will work with these. (There's also a cpia_pp driver for parallel port camera models but be sure to also use the cpia module with it.) The c-qcam and bw-qcam modules under this category are for the parallel port QuickCam cams. A list of cameras and the drivers they use are given in Section 4 of the WebCam HOWTO at the LDP (Linux Documentation Project).

    apt-get install xawtv

    Note: You don't really need to get xawtv working to get the Web cam server working. We're using it simply to create the needed /dev/video0 device file (the"special files" referred to in the xawtv package installation).

    make the cam device readable by everyone

    chmod 666 /dev/video0
    xawtv -hwscan

    You'll see your video card listed but you should also see your cam listed as /dev/video0 or with some other number besides '0'.

    Cookies help us deliver our services. By using our services, you agree to our use of cookies.
    Cookies help us deliver our services. By using our services, you agree to our use of cookies.